24hr
MAX
40˚C
24hr
MAX
40˚C
Turn the dirt container
lid anti-clockwise and lift
to remove
Cleaning the shroud
Cleaning the post-motor filter
Remove the pre-motor
filter to allow access to
the shroud
Tap the shroud over a bin
to remove dirt and debris
Twist post motor filter
cover anti-clockwise and
lift to remove
Tap the post motor filter
over a bin to remove any
dirt or debris
Remove the filter
Wash the filter under
running water (40°C max)
Leave to dry for 24 hours
and then replace before
using your vacuum
Switch off your vacuum cleaner at the main socket.
Using a pair of scissors cut any hair or debris free
from around the brushbar
Remove the rubber ring
Push both buttons to open
the TurboTool
Using a pair of scissors,
cut any hair or debris free
from around the brushes
Removing debris from the brushbar
Removing blockages from the TurboTool
Let’s talk technical
Taking care of your machine
Wash the shroud under
running water and leave
to fully dry before placing
back into the machine
Always switch the machine off
and unplug before carrying out
any maintenance.
WARNING
If the air inlet, hose or telescopic
tube is blocked, switch off the
vacuum cleaner and remove the
blockage(s) before re-starting the
vacuum cleaner.
WARNING
