6
vax.co.uk
How To Use
Operating your carpet washer
Your dirty water tank is fitted with a float. When the dirty water tank is full or the floor head is not in contact with the carpet
the float will shut off the suction at the floor nozzle. You will be able to hear if this has happened as the motor noise on the unit
will increase. Once the float is activated, empty the dirty water tank if full. If the dirty water tank is not full then turn off your
machine at the power switch and wait for the float to settle.
Pour required dose of carpet
cleaning solution (approx.
40ml per 1.0L of water).
Mix solution with warm
water. (max 40°C).
Remove clean water tank and ensure that it is rinsed
thoroughly and free of pre-treatment solution.
Fill clean water tank with
solution mix.
Tighten cap before
returning tank to unit.
Unwrap power cord and plug unit in.
Recline the machine. When
the machine is reclined, the
brushbar will rotate. In
an upright position, the
brushbar will not rotate.
Press trigger to
release solution.
For best results apply
solution on the forward
stroke and release the
trigger to recover solution
on the backward stroke.
Turn the machine on.
