Never use the turbo nozzle on cars,
tyres and engines.
WARNING
To attach the jet nozzle,
fit the lance with a firm
push and twist to lock
into place.
To attach the turbo
nozzle, fit the lance with
a firm push and twist to
lock into place.
Using your accessories
Turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios or masonry. As it is not
fitted with a pressure regulator it is not suitable for use on delicate or painted surfaces.
Using your machine
Hold down the release button on the
lance, push the jet nozzle and lance
firmly together until you hear an audible
CLICK. Release the button and gently
pull the jet nozzle to make sure it is
locked securely before use.
Hold down the release button on the
lance, push the turbo nozzle and lance
firmly together until you hear an audible
CLICK. Release the button and gently pull
the turbo nozzle to make sure it is locked
securely before use.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Squeeze the trigger on the trigger handle to release
a high pressured water jet, and start cleaning.
Using your machine
IMPORTANT: Always make sure the machine is switch off and the safety button on the trigger handle is LOCKED
before connecting/disconnecting the lance, nozzle or accessories.
Jet nozzle has a wider spray and is ideal for use on surfaces areas such as cars, garden furniture, decking and boats.
Fill the solution application
bottle with the diluted solution
mix. Turn the lid clockwise
to lock.
To remove or refill, lift the locking tab to
release the solution application bottle from
the jet nozzle.
Push the solution application
bottle onto the lance fitted with jet
nozzle until locked into place.
Switch the pressure washer
on and squeeze trigger to
dispense the water and
solution mix.
Using solution with your pressure washer
IMPORTANT: When using solution make sure you follow the dilution instructions and use Vax solution only.
IMPORTANT: Solution can only be used with the jet nozzle.
Always rinse fresh water through your
pressure washer for 1 minute after
using solution to prevent blockages.
TIP
