Vax PowerWash 1700W, Руководство пользователя, Страница: 13 / 16

What to do if it goes wrong Getting in touch
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the pressure washer
before calling.
Solution Problem
There is an
accessory missing
Why won’t my pressure
washer turn on?
Why won’t the water
/solution dispense?
Why won’t my pressure
washer reach operating
pressure?
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your machine.
• Make sure the on/off switch is set to the ‘I’ position.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with
a British 13amp fuse.
• Check if your RCD has been tripped, if it has tripped, reset it.
• The power cord maybe damaged. Please contact our Customer Care
Line on (UK) 0844 412 8455 (ROI) 1-800 928 308.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• Nozzle may be blocked, clear any blockages and clean nozzle.
Go to the ‘Lets talk technical’ page.
• Remove and clean the water inlet filter Go to the ‘Taking care of your
machine’ page.
• Check the water flow rate to your water supply.
• The pump may have stopped, make sure the on/off switch is set to the
‘I’ position and check the plug fuse.
• The pump may have stopped. This may be because of overheating due
to poor water supply. Check the water flow rate to your water supply.
• Hose may be blocked or kinked, check for leaks in the hose and clear
any blockages. Straighten out the hose to ensure no kinks and check
the hose pipe connections to the tap and water inlet.
• There may be an air lock. To remove, unlock the trigger safety lock
and squeeze the trigger to release water before the machine is
switched on.
• Check assembly of solution application bottle Go to the ‘Using
your machine’ pages. Nozzle/accessory may be blocked, clear any
blockages and clean nozzle Go to the ‘Lets talk technical’ page.