Attach both wheels and push
until they click into place.
Attach the hose connector
to water inlet by turning
clockwise until tight.
Assembling your pressure washer
Preparing your pressure washer for use
Always make sure the pressure washer and water supply is off before
connecting or disconnecting the hose and accessories
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED
position when not in use or connecting/disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not
damaged broken or worn before use.
Push the pressure hose firmly
to the water outlet and turn the
pressure hose collar clockwise
until tight.
Whilst firmly pushing the lance into
the trigger handle turn clockwise to
lock into position.
A trigger safety lock is located
underneath the handle. The safety
lock should always be in LOCKED
position before connecting/
disconnecting the pressure hose
to the trigger handle.
To remove the lance from the trigger handle
firmly push and twist the lance anti-clockwise.
When unlocked pull to remove.
To connect pressure hose to trigger
handle, press the pressure hose
release button and push pressure
hose to lock into position. Gently pull
the pressure hose to make sure it is
locked securely.
Getting started
Using your machine
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE.
After connecting pressure
hose, lance and accessories
check they are securely fitted
and locked in place before
turning on.
TIP
Make sure water supply is not
connected. Firmly push the
water hose pipe with suitable
connector onto the water inlet
to lock into position.
Connect water hose pipe to
a suitable water supply and
turn water on.
Before plugging the machine in, press
the unlock safety button on the trigger
handle and squeeze the trigger until
water starts to flow through the nozzle.
Push switch to ‘I’ position to
turn on. The machine will run
for a few seconds then stop
but no water will be released.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
Push switch to ‘O’
position to turn off.
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using this pressure washer.
Don’t aim the pressure washer directly
at people, animals, plants, electrical
components, wires or the pressure
washer itself.
WARNING
Connect the power cord
to the mains supply via
an RCD adaptor.
LOCKED
UNLOCKED