Getting started
Assembling your vacuum cleaner
Press both buttons at end
of hose and insert into
hose entry point.
Press button on telescopic
extension tube and adjust
to required length.
Insert the other end of the
telescopic tube into the
floor head.
Before you begin cleaning
IMPORTANT: The vacuum cleaner is equipped with a thermal cut-out. If for any reason the vacuum cleaner does
overheat, the thermostat will automatically turn the vacuum cleaner off. If this happens, switch the vacuum cleaner
off and unplug. Remove and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum
cleaner to cool for approximately 1 hour (if you have cleaned the filters please wait 24 hours for the filters to fully dry
before putting back into the machine).
Clean the pre-motor every time the dirt container is emptied and replace the filters every 12 months.
If the vacuum cleaner is blocked, switch off and unplug before removing the blockage.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
WARNING
Always switch off the vacuum cleaner
before connecting or disconnecting the
hose/attachments, or removing and
emptying the dirt container.
Insert hose grip into
telescopic extension tube.
Содержание Performance 12
Страница 1: ...vax co uk Performance 12 Let s get started C86 PB Be Pe Te ...
Страница 15: ...Notes ...