23
7 Troubleshooting
Red LED is blinking
fast and blue LED is
blinking slowly in
combination with
2 long beeps
Bumper is stuck.
Move robot to an area without obstacles and restart.
Bumper function is impaired by debris inside the bumper.
Remove the blockage inside the bumper and restart.
Side brush has
stopped turning.
The side brush might be prevented by dirt from turning freely.
Remove the side brush (
Z
Chapter 7.3, "Removing and cleaning the main
brush"
) and free it and its receptacle of dirt. If necessary, carefully use scis-
sors or tweezers.
Main brush has
stopped turning.
The main brush might be prevented by dirt from turning freely.
Remove the main brush (
Z
Chapter 7.3, "Removing and cleaning the main
brush"
) and free it and its receptacle of dirt. If necessary, carefully use scis-
sors or tweezers.
Robot will not char-
ge.
The AC adapter is not plugged in properly.
Check whether the plug or the AC adapter are fitted correctly in their so-
ckets (
Z
Chapter 3.3, "Connecting the docking station"
).
The toggle switch underneath the robot is not switched to "on" position
("0").
Switch the toggle switch to "on" position ("I"),
Z
Chapter 3.4, "Charging the
battery pack for the first time"
.
The operating time
is becoming in-
creasingly shorter.
Drive wheel, side brush or main brush stuck.
Switch off your robot via the "On/Off" key (
) or the "
" key on the
remote control and remove dirt from wheels and brushes,
Z
Chapter 7.3,
"Removing and cleaning the main brush"
. If necessary, carefully use scis-
sors or tweezers.
Problem
Possible cause / solution
7 Troubleshooting
7.2 Ordering accessories and spare parts
Item no.
Content
Item no.
Content
0608001
2 side brushes
0608005
1 docking station
0608002
1 filter
0608006
1 light fence tower
0608003
1 AC adapter
0608007
1 remote control
0608004
1 battery pack
(rechargeable)
0608008
1 main brush
1 support brush
2
4
RBNAV1B1_Navigator_Robot_UG_Amd_190216.indd 24
19/02/2016 10:43