19
5 Use
5.6 Switching off
Go
A
24
HOUR
22
NOTE:
You can switch the robot off whenever you
want; just choose one of the following:
Press the "On/Off" key (
) on the ro-
bot shortly. This will stop the robot (it is
now in standby).
Press the "On/Off" key (
) on the ro-
bot for 1 second or longer. This will turn
the robot off.
Press the "
" key on the remote con-
trol. This will stop the robot (it is now in
standby).
Press the "
" key on the remote con-
trol for about 2 seconds. This will turn the
robot off.
Lift the robot. It will stop within 1 second.
NOTE:
If you lift the appliance while it is in opera-
tion, the motors will switch off automatically
after approx. 1 second without floor contact.
However, in this case the appliance is not
switched off (blue LED flashing slow, red
LED flashing fast). In this case switch off
your robot via the "On/Off" key (
) or the
"
" key on the remote control. The error
will be deleted. You can start your robot
again.
20
6 After each use
6
After each use
6.1 Transport and storage
Always carry the appliance carefully; ide-
ally use both hands.
Always store the appliance in its original
packaging in a cool, dry place, and keep it
out of reach of children.
6.2 Emptying the dust bin module
1.
Ensure that the appliance is switched off
(no LED is lit).
2.
Remove the robot's upper cover (Fig. 23).
It might be necessary to press firmly
(Fig. 23/arrows) to release the cover from
its locked position.
3.
Carefully pull the dust bin module out of
the appliance (Fig. 24).
4.
Remove the dust bin cover (Fig. 26).
5.
Take out the filter (Fig. 27).
6.
Tap lightly to knock out both parts and re-
move coarser debris with your hand.
7.
If dust bin and filter can no longer be com-
pletely emptied through this measure, pro-
ceed as described under
Z
Chapter 6.3,
"Cleaning dust bin and filter"
.
8.
Insert the filter back into the bin (Fig. 27)
and put the dust bin cover back on
(Fig. 28).
9.
Insert the dust bin module back into the
appliance (Fig. 24) and put on the upper
cover (Fig. 25). It will audibly snap into
place.
CAUTION:
Never store the appliance next to heat
sources (e.g. heater, oven). Avoid exposing
it to direct sunlight. Heat can damage the
appliance.
23
24
25
NOTE:
It is best to empty the dust bin module after
each vacuuming session. However, empty
the dust bin module at the latest
Once a month,
Prior to a longer period of non use,
Prior to shipping.
RBNAV1B1_Navigator_Robot_UG_Amd_190216.indd 21
19/02/2016 10:43