Vax Air Lift Steerable UCPESHV1, Давайте начнем

Страница: 15 / 20

Let’s talk technical
Changing the belt
Using a crosshead
screwdriver, remove 3
screws from the belt
cover on the side of the
floorhead.
Pull to remove the belt
cover.
Pull to remove the
brushbar location plate.
Remove belt.
Clean any debris from
spindle. Place new belt
onto spindle, lining up
teeth on the belt over
and onto the cog.
Removing dirt/debris from TurboTool
Slide the locking ring
to remove.
Lift and separate the housing.
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
Line up the tabs on front
of housing and re-fit. Slide
locking ring into groove
to secure.
Removing a blockage from the hose
Press the dirt container
release buttons located the
side of the carry handle.
Pull and remove the
dirt container off the
vacuum cleaner.
Pull and remove the
hose from the hose holder.
Pull and stretch the hose,
any blockage in the hose
should then be visible.
Using a broom handle or similar blunt instrument, push into the stretched out hose to remove blockage. TIP