![background image](http://html1.mh-extra.com/html/vax/air-lift-steerable-ucpeshv1/air-lift-steerable-ucpeshv1_lets-get-started_3716870016.webp)
• Check the ‘This pack contains’ panel on the box to make sure the part
is included with your vacuum cleaner.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with a 13amp
British fuse.
• The motor thermostat may have tripped. If this has happened, unplug the vacuum
cleaner. Remove and empty the dirt container and check the hose for blockages.
Clean the filters and allow the vacuum cleaner to cool for approximately 1 hour
(if you have washed the filters you will need to wait 24 hours for the filters to fully
dry before putting them back into the vacuum cleaner).
• The brushbar may not have been activated. Go to ‘Using your machine - The full unit’.
• The vacuum cleaner may not be reclined. Go to ‘Using your machine - The full unit’.
• The lift out cylinder may not be correctly assembled to the back panel and floorhead.
Go to ‘Assembling your upright’.
• The brushbar may be obstructed. Go to ‘Let’s talk technical’.
• The brushbar may need resetting. Go to ‘Let’s talk technical’.
• The belt may be broken. Go to ‘Let’s talk technical’.
• The dirt container may not be fitted correctly, remove the dirt container and
re-attach making sure it is clicked firmly into place.
• The air vent is open on the floorhead, reducing the suction. Go to ‘Using your
machine - The full unit’.
• The dirt container may be blocked, empty the dirt container and clean the filters.
Go to ‘Taking care of your machine’.
• There may be a blockage in the hose. Check and clear any blockages. Go to ‘Let’s
talk technical’.
• The brushbar may not be turning. Go to ‘Why isn’t my brushbar rotating?’ below.
• If the accessory/tool will not pick up, check and clear any blockages. Go to ‘Let’s
talk technical’.
• The filters may need cleaning or replacing. Go to ‘Taking care of your machine’.
Solution
Problem
What to do if it goes wrong
There is an
accessory missing
Why does my vacuum
cleaner have no power?
Why won’t the vacuum
cleaner pick up?
Why isn’t my
brushbar rotating?
• If the brushbar has been obstructed, the brushbar motor protection sensor may
have been activated. The brushbar will stop and the light on the floorhead will
illuminate red. Check the brushbar and clear any hair or debris. Go to ‘Let’s talk
technical’.
Why is there a red light
on my floorhead?
• The filters may not be correctly fitted. Go to ‘Taking care of your machine’.
• The dirt container may be full or blocked. Go to ‘Taking care of your machine’.
• The filters may need cleaning or replacing. Go to ‘Taking care of your machine’.
• There may be a blockage in the hose. Go to ‘Let’s talk technical’.
Why is dust escaping
from the vacuum?
Содержание Air Lift Steerable UCPESHV1
Страница 17: ...Getting in touch Registration required Terms and conditions apply see vax co uk for details...
Страница 19: ...Notes...