Vax ACTION 602 U86-AN-BE, Начало работы

Страница: 14 / 20

Replacing the belt
Place belt on rounded
area of brush bar
without bristles.
Line up right side of
brush bar with base,
push into place. Lift and
push left side of brush
bar until clicks into place.
Lie vacuum cleaner
on its back exposing
brush bars. Use a cross
head screwdriver.
Undo 5 screws.
Line up brush bar
cover, push until it
clicks into place.
Replace 5 screws
and tighten.
Lift to remove
brushbar cover.
Lift to remove brush
bar. Remove and
dispose of old belt.
Clean any debris from
spindle. Place new
belt on spindle.
Pull hose out of
hose to machine
connector.
Lift clip under the
hose inlet.
Pull latch out and
remove hose.
Remove any
blockage by
inserting wire coat
hanger into hose.
Line up latch,
push until it clicks
into place.
Removing a blockage from the hose
Let’s talk technical
If the brushbar does not rotate
easily then the belt may not
have been fitted correctly. Make
sure the belt is not twisted.
WARNING