Vax ACTION 602 U86-AN-BE, Начало работы

Страница: 10 / 20

Press the dirt container
release button, pull to remove.
Emptying the dirt container
Cleaning the HEPA pre-motor filter
Hold dirt container
over a bin.
Press the dirt release clip,
allowing dirt/debris to fall out.
Turn the dirt container
release button, pull
to remove.
24hr
Leave to dry for
24 hours or until
fully dry before
placing back in the
vacuum cleaner.
Turn the HEPA
pre-motor filter
anti-clockwise,
pull to remove.
Tap HEPA pre-motor
filter over a bin to remove
any dirt/debris.
Rinse under water
(max 40°C).
Line up HEPA
pre-motor filter tabs
in dirt container lid,
turn clockwise until it
clicks into place.
Taking care of your machine
Filters require cleaning at least every 3-6 months (depending on the level of use).
Don’t use your vacuum cleaner without all the filters in place.
IMPORTANT:
The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the
thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine
for blockages and clean the filters. Wash the filters with warm water (40°C max) and leave for 24 hours or until
fully dry before replacing into the machine.
TIP
Don’t over fill the dirt
container to avoid blocking
the air flow through the
vacuum cleaner and replace
filters every 6-9 months.