Vaventis fresh-r everywhere On-The-Wall, Руководство по установке

Страница: 8 / 36

8
The big holes
To drill the lower big hole (160 mm) , do the following:
1. Drill through the outer wall(s) at a downward angle of 2 degrees.
This is to allow the condensate to drain towards outside.
To drill the upper big hole (160 mm) , do the following:
1. Drill straight through the wall(s).
A
A
fig. 5 Make sure the wall is well prepared
2. Remove dust and other materials from the holes.
3. Get a duct pipe (this is the blue PVC pipe) with EPP cover (this is a foam tube) and
try if it fits the holes.
The four corner holes
To drill the four corner holes, do the following:
1. Check the dimensions as shown in fig. 6.
2. Drill the four corner holes. Use a 8 mm masonry drill.
3. Place plugs into the four corner holes.
You’ll find the plugs in bag A.
2 degrees
160 ± 2 mm
897± 2 mm
Inside the
house
Outside the
house
Section cut AA
160 ± 2 mm