Vauxhall Vectra, Руководство пользователя

Страница: 180 / 330

175 Driving and operation
Interrup tion of power supply
The c lutch is not disengaged if the vehicle
battery is discharged and a gear has been
selected. The vehicle ca nnot move.
If the battery is flat, start the vehicle using
jump leads – see pag e 230.
If the cause of the power failure is not a
discharged battery, conta ct a workshop. If
the vehicle m ust be rem ov ed from flowing
tra ffic, relea se the c lutch as follows:
1. Apply handbrak e and switch off ignition.
2. Opening and p ropp ing up the bonnet -
see page 228.
3. Clean Easytronic around the cap
(see Fig. 17925 J) so that no d irt c an get
into the opening when the cap is
rem oved.
4. Rotate cap to slacken and remove by
lifting upwards – see illustration.
5. Turn the a djusting screw clockwise using
a flat-head screwdriver (v ehicle tools 3 –
see page 238) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resista nce, since
this can damag e the Easytronic.
6. Fit cleaned cap ag ain. The cap must be
in full contact w ith the housing.
Towing the vehic le and starting the eng ine
is not perm itted when the clutch has been
released in this way, although the vehicle
can b e m ov ed a short distance.
Contact a workshop immediately.