Vauxhall 2012 Ampera Скачать руководство пользователя страница 70

Страница: 70 / 195

Instruments and controls

This screen indicates that charging is

active and the estimated charge

completion time is 10:00 a.m.

This screen indicates that charging is

programmed to be delayed with an

estimated completion time of 7:00

a.m.

This screen indicates that the vehicle

is fully charged and the charge cord

is not connected.

This screen indicates that the charge

cord is connected, but the vehicle

cannot be charged.

Colour-Info-Display

Colour-Info-Display is located in the

instrument panel.
Colour-Info-Display indicates:

■ Climate control

■ Infotainment system, see

description in the infotainment

system manual.

■ Vehicle personalisation settings
■ Power flow information
■ Charging settings
■ Energy information
■ Time

The Colour-Info-Display controls only

need a light touch to operate and work

best with bare hands. The controls

will work with most gloves although

they may take longer to respond. Use

the finger pad rather than the finger

tip to minimise response time. If the

controls are not responding, remove

the gloves.

Содержание 2012 Ampera




































































































































































































Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды

Vauxhall 2012 Ampera, Руководство пользователя

Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды