Vauxhall 2012 Ampera Скачать руководство пользователя

Страница: 168 / 195

Vehicle care

167

Hazard warning flashers

91.

1. Take the tyre repair kit from the

compartment.

2. Unwrap the air only hose (G) and

the power plug (H).

3. Place the kit on the ground.

Make sure the tyre valve stem is

positioned close to the ground so

the hose will reach it.

4. Remove the tyre valve stem cap

from the flat tyre by turning it

counterclockwise.

5. Attach the air only hose (G) onto

the tyre valve stem by turning it

clockwise until it is tight.

6. Plug the power plug (H) into the

accessory power outlet in the

vehicle. Unplug all items from

other accessory power outlets.
Power outlets

56.

Do not pinch the power plug cord

in the door or window.

7. Start the vehicle. The vehicle

must be running while using the

air compressor.

8. Turn the selector switch (A)

clockwise to the air only position.

9. Press the on/off (B) button to turn

the compressor on. The

compressor will inflate the tyre

with air only.

10. Inflate the tyre to the

recommended inflation pressure

using the pressure gauge (C).
Tyre and loading information label

156.

Tyre pressures

185.

The pressure gauge (C) may read

higher than the actual tyre

pressure while the compressor is

on. Turn the compressor off to get

an accurate reading. The

compressor may be turned on/off

until the correct pressure is

reached.
If you inflate the tyre higher than

the recommended pressure you

can adjust the excess pressure by

pressing the pressure deflation

button (D), if equipped, until the

proper pressure reading is

reached. This option is only

functional when using the air only

hose (G).

11. Press the on/off button (B) to turn

the tyre repair kit off.
Be careful while handling the tyre

repair kit as it could be warm after

usage.

12. Unplug the power plug (H) from

the accessory power outlet in the

vehicle.

13. Disconnect the air only hose (G)

from the tyre valve stem by turning

it counterclockwise, and replace

the tyre valve stem cap.

14. Replace the air only hose (G) and

the power plug (H) and cord back

in their original locations.

15. Place the equipment in the

original storage location in the

vehicle.

Содержание 2012 Ampera




































































































































































































Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды

Vauxhall 2012 Ampera, Руководство пользователя

Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды