Vauxhall 2012 Ampera Скачать руководство пользователя

Страница: 62 / 195

Instruments and controls

Turn signal

Illuminates or flashes green.

Flashes

The control indicator flashes if a turn

signal or the hazard warning flashers

are activated.
Fast flashing: failure of a turn signal

light or associated fuse.
Bulb replacement

143.

Fuses

147.

Turn signals

92.

Seat belt reminder

Seat belt reminder on front

seats

for driver's seat illuminates or

flashes red.

for front passenger seat illuminates

or flashes red, when seat is occupied.
The seat belt reminder of the front

passenger seat may also turn on if an

object is put on the seat.

Illuminates

After the warning lights of the

respective front seat have flashed for

a while, until the seat belt has been

fastened.

Flashes

Up to a certain time after the ignition

has been switched on.

Seat belt status on rear seats

flashes or illuminates.

Illuminates

After the ignition has been switched

on, the seat belt light illuminates red.
After the passenger seat belts have

been buckled, the corresponding seat

belt light turns green.

Flashes

While the vehicle is moving, if

a second row passenger who was

previously buckled becomes

unbuckled, the corresponding seat

belt symbol will flash red for several

seconds and a chime may sound.
Fastening the seat belt

37.

Airbag and belt tensioners

illuminates red.

When the ignition is switched on, the

control indicator illuminates for

several seconds. If it does not

illuminate, does not go out after some

seconds or illuminates whilst driving,

there is a fault in the airbag system.

Seek the assistance of a workshop.

The airbags and belt pretensioners

may fail to trigger in the event of an

accident.
A message may also display in the

Driver Information Centre (DIC).
Deployment of the belt pretensioners

or airbags is indicated by continuous

illumination of

Warning

Have the cause of the fault

remedied immediately by

a workshop.

Belt pretensioners, airbag system

36,

40.

Содержание 2012 Ampera




































































































































































































Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды

Vauxhall 2012 Ampera, Руководство пользователя

Результаты поиска

Содержание 2012 Ampera

Отзывы:

Похожие инструкции для 2012 Ampera

Бренды по названию

Популярные бренды