Vatech PaX-Reve3D, Руководство по установке

Страница: 24 / 56

PaX-Reve3D
22
3.2.
Installing the Cephalometric unit
This explains how to install the Cephalometric unit to the column unit, as described in the following figures.
Be careful to handle this unit, because sensor is so susceptible to the physical impacts.
1. Do follow these procedures to mount the Cephalometric unit on the column unit.
①
Insert the supplied Guide Shaft Assembly into the column and move it up fully so that one end of
it falls in the hole. ( Figure 2)
②
Locate the Cephalometric unit.
③
Move it to the column unit as close as possible.
④
Locate A, B on each part, respectively and try to match them together.
A
B