Vatech PaX-Reve3D, Руководство по установке

Страница: 10 / 56

PaX-Reve3D
8
z
CEPHALOMETRIC UNIT: an assembled unit to carry out the Cephalometric imaging.
z
ONE-SHOT SENSOR: a sensor detecting signal in Cephalometric mode.
z
COLUMN UP/DOWN ADJUSTER: adjust the height of equipment to the patient height.
z
TOUCH PAD SCREEN : allows the operator to control certain unit functions by touching screen.
It also displays the operating parameters and some texts messages. This panel works in a way
that touching the screen activates the unit.
z
EAR ROD : The vertical pieces holding the ear rods are usually wood or plastic. Wood is better.
z
NASAL POSITIONER: help the patient position correctly
-
usually in Cephalometric mode.
z
EMERGENCY SWITCH: for safety reasons, this is used to terminate power to equipment by
pressing this button when a severe fault occurs. Its primary use is to protect humans and
equipment from a severe injuries and damages.
z
CHIN REST : help the patient rest while imaging.
z
X-RAY SENSOR Module: used to detect a dose of X-Rays through the patient and convert it
into electrical signal. This module consists of two different sensors to perform different purposes
- CT sensor and panoramic sensor.
z
LED LAMP: Indicates current X-ray exposure activity (green at idle state, but turn into orange
color while x-raying).
z
ROTATING UNIT: moves to the proper position and turns around patient’s head during exposure.
z
ON/OFF SWITCH: turns on and off the equipment.
z
X-RAY TUBE: a source of X-Ray emission.
z
MIRROR: let the patients correct positions by themselves through reflection in a mirror.
z
ACCESSORY CABINET : used to keep little things relevant to the operation of this unit.
z
TELESCOPIC COLUMN: this part of column moves up and down to be adjusted to patient
height.