Page 61
For more information see below:
section 7.18 Using Bite Alignment Tools
7.16
Carrying out a Manual Bite Alignment
If the
Automatic Bite Alignment
is unsuccessful, due to specific
challenges related to the scanned arches that render automatic
reconstruction problematic, the
Manual Bite Alignment
tool
enables you to
manually
select specific location points on the
Maxillary and Mandibular arches.
To Carry out a
Manual Bite Alignment
:
A.
Align Mandibular-Paired Points
STEP 1.
Click on the
Manual Alignment
icon in the
Bite
Alignment tools
menu at the bottom of the screen.
STEP 2.
S
can a 2-3 teeth and 7-8mm gum segment
on
the LEFT molar/pre-molar region in Occlusion.
You will be prompted to
select a mandibular paired point
on
the bite scan segment.
STEP 3.
Click
Select Point
and choose a point on
the
mandibular arch
of the LEFT-side bite
scan.
STEP 4.
When you have positioned the marker,
HOLD [Ctrl]
and click
: a yellow dot will indicate the selected
mandibular-paired point.
STEP 5.
Click
Confirm Point
.
The bite scan segment and the selected mandibular-paired
point is displayed automatically in the top right-hand of the
screen. You will be prompted to select the corresponding
paired point on the mandibular arch.
STEP 6.
As before, click
Select Point
,
HOLD
[Ctrl] and click
: a yellow dot will
indicate the selected mandibular-
paired point.
STEP 7.
Click
Confirm Point
.
