Page 85
10.3
Disposal
The EzScan
is an electrical device with electronical components inside and should be
disposed of in accordance with local environmental laws and regulations.
10.4
Calibration
The EzScan is calibrated in the factory and therefore does not require calibration
when installed.
If the EzScan begins to have problems scanning and recognizing teeth models, contact
your dealer or Vatech support technician.
If the scanner cannot be recalibrated remotely, this may result in the system being
returned for repair/ calibration.
For more information see:
Chapter 12 - Support, Warranty and Repair Service.
WARNING
: Do not remove the pouch before the sterilizer
completes its full dry cycle. If the pouch is wet or has any signs of
moisture, this can potentially leave water spots on the mirror
which can affect image quality during scanning.
WARNING
: General prohibition indication. The functionality of the
system can be destroyed in the case of incorrect use. If
unauthorized changes have been made to the delivered system
and accessories, the warranty by Vatech becomes void. Vatech will
not accept any responsibility or liability for the improper
functioning of the product in such a case.
WARNING
: Use extreme caution when cleaning the mirror as it is
very delicate and is prone to scratching.
