Pre-programmed shot capacity- 1cup
1.
Press “1 cup button” once, the button will be lighting indicated that it has been selected, the
other buttons will turn off, the pump will pump for 2.5S, after a break of 3S for pre-infusion, it will
continue pump.
2.
A preset single espresso volume of approximately 30ml will be extracted.
3.
The machine will automatically stop once the pre-set capacity has been extracted, after the
extraction the lights of “1 cup button” and “2 cup button” will flash in 3 seconds and beep 1 sound
indicating extraction finished, then the buttons of “1 cup” and “2 cup” will be lighting.
Pre-programmed shot capacity- 2cups
1.
Press “2 cup button” once, the button will be lighting indicated that it has been selected, the
other buttons will turn off, the pump will pump for 2.5S, after a break of 3S for pre-infusion, it will
continue pump.
2.
A preset single espresso volume of approximately 60ml will be extracted.
4.
The machine will automatically stop once the pre-set capacity has been extracted, after the
extraction the lights of “1 cup button” and “2 cup button” will flash in 3 seconds and beep 1 sound
indicating extraction finished, then the buttons of “1 cup” and “2 cup” will be lighting.
Programming the quantities of coffee in the cup
The appliance is set by default to automatically deliver standard quantities. To change these
quantities, proceed as follows:
1.
After pre-heat program is finished, place the cup or cups under the filter holder spouts.
2.
Change the quantity of “1 cup” or “2 cup” -- Press and hold the button “1 cup” or “2 cup”. The
coffee maker starts delivering coffee. Once the required quantity of coffee has been delivered into
the cup, release the button. Delivery stops and the light flashes to indicate that the quantity has
been saved correctly.
3.
When the two coffee lights come on steadily, the appliance is ready for use.
Resetting the quantity of coffee
If you can want to cancel the quantity of coffee, please proceed as follows:
1.
Connect the machine to power supply, all the buttons will flash for 2 seconds, after all the
buttons off, press and hold the button “steam” button for 3 seconds, release the button when the
machine with beep sound.
2.
Immediately press the “2 cup” button, the machine will beep 5 sounds indicating that the
quantity of coffee has been reset.
3.
After reset, all the buttons off, press the ‘ON/OFF’ button, the machine will
buzzer warning,
press
“1 cup” or “2 cup”
button, the buzzer warning will stop after some water come out, and
the machine returned to normal service.
