12 / 21
2. Press the ENTER button to confirm action. Then press MENU to exit. Deactivate ID
addressing in each fixture by setting panel function ID ON/OFF to OFF.
5.4. DMX addressing with ID address
1. Follow intrsuctions ^1 for DMX 512 addressing
2. Activate ID addressing in each fixture by setting panel function ID ON/OFF to ON. SETTINGS
to ID ON/OFF to ON for every DMX 512 starting address the user can set 66 separate ID
addresses. Set ID addresses in each fixture by setting panel function ID address to
incremental values (i.e. 1, 12, 24, 36) SETTINGS to ADDRESS to 01~66
3.
5.5. Setting the DMX address
Each fixture requires a start address from 001 ~ 512. A fixture requiring one more channels for
control begins to read the data on the channel indicated by start address. For example, a fixture
that occupies or uses 5 channels of DMX and was addressed to start on DMX channel 100, would
read data from channels 100, 101, 102, 103, and 104. Choose start addresses so that the
channels used do not overlap and note the start address selected for future reference. The
Flatbeam Duo uses up to 11 channels of DMX. If this is your first time using DMX, we recommend
reading the DMX primer in the Appendix section.
5.6. Control Panel Functions
All fixtures and settings are accessible via the built-in control panel interface.
