Varytec Easy Move LED XS, Руководство пользователя

Страница: 9 / 21

9 / 21
5. Technical specifications
5.1. Change internal Fuse
Push the out the fuse-holder with a screwdriver. Change the fuse only with one of the exact same
type. Push the fuse-holder back on its origin position and connect the mains cable to the socket again.
5.2. Link devices
You need 3-pin DMX cables to realize a lightshow with one or more devices. However you can run the
devices also by master/slave control. The maximum quantity of devices, in this mode, is given by the
maximum usable channels of DMX512. The addition of all fixture channels must not be higher than
the maximum channels of DMX512.
Important: Devices, which are controlled by DMX512, are connected by a serial cable. For a
proper operation, the EIA-485 provides, to run not more than 32 devices in one DMX
line. If want to use more than 32 devices, you need to use a DMX-splitter.
Maximum recommended link distance: 500m
Maximum recommended devices in on DMX line: 32