Varytec Easy Move LED XS, Руководство пользователя

Страница: 16 / 21

16 / 21
12.7. Service functions
12.7.1. Device reset
1. Press the “MODE” button until “rESt” appears in the display.
2. Press enter.
12.7.2. Set to factory default
1. Press the “MODE” button until “LoAd” appears in the display.
2. Press enter.
13. Mode of operation
13.1. Stand alone mode (Auto Mode)
This mode allows to use the device without DMX-controller by pre-programmed movement, included
two speed options.
1. To configure the device for fast auto-mode, choose “NAFA”. The display shows “FASt”.
2. To configure the device for slow auto-mode, choose “NASL”. The display shows “SLoW”.
13.2. Master/Slave mode
This mode allows to link up to 32 devices and to use them without DMX-controller.
1. Use standard DMX-cables to connect the devices to each other. It could be useful to use a
DMX-terminator after last device in the DMX-line.
2. Set the first device in the DMX-line as master. Choose “NAFA/NASL” or “NStS”, depending on
which program you want to use.
Master auto “NAFA” or “NASL”
Master sound to light “NStS” (SrUn appears in the display).
3. Set all the other devices to slave mode. Select “SLAv” in the menu with the “UP/DOWN”
buttons. They will react like the master.
Slave “SLAv” will be shown as “Son” in the display.
13.3. DMX mode
In this mode you can control the device by every usual in trade DMX controller. The default address is
“001” and will be shown in the display as “d001”. Adjust the the addresses of the devices according to
the addresses which are adjusted at the controller.