POWXQG3050
EN
Copyright © 2014 VARO
P a g e
|
11
www.varo.com
9.3
Air cleaner
Release the air cleaner cover and remove the
dust.
If the element is dirty, clean it by tapping it, by
blowing away the dirt or clean in warm, soapy water
(dry completely before installing).
If the element is bent or damaged, replace it.
After you have cleaned the element reattach it to
the cleaner body with the stamp on the outside
(facing the cleaner cover).
After that, replace the cleaner cover.
Important: a clogged air cleaner reduces engine performance. Operating with no element or
with a bent or damaged element causes irregular wear and tear of the engine mechanism.
9.4
Air cooling
This engine is air-cooled. Dust clogging up the air cooling inlet port and the cylinder fins will
cause the engine to overheat. Periodically check and clean the cylinder fins after removing
the air cleaner and the cylinder cover.
9.5
Anti-vibration system
The deformed or damaged anti-vibration system
may cause of the breakages like getting rickety or
falling off of engine and/or blade .
Check periodically if the springs are not
deformed or damaged
9.6
Fuel filter
When the engine runs short of fuel supply, check
the fuel cap and the fuel filter for blockage.
