POWXQG3050
EN
Copyright © 2014 VARO
P a g e
|
13
www.varo.com
to dampness.
10 CLEANING
Use a damp cloth to clean the plastic parts.
Do not use any detergents, solvents or pointed objects.
11 STORAGE
So that the hedge trimmer will work again after a long period of inactivity, you should
observe the following points:
Empty the petrol tank. To do this, start the engine and let it run until it reaches a standstill.
Dispose of the remaining petrol in an environmentally friendly way.
Let the engine cool and take out the sparking plug.
Pour a small spoonful of 2-stroke mixture into the sparking plug opening and slowly pull
the starter cord right through to the end several times. This gets rid of small deposits of
rust and lubricates the piston and cylinder.
Check the sparking plug and replace it if too much of the firing tip has been burnt off.
Keep the blade in a dry place
– out of the reach of fire.
12 STARTING UP AFTER LONGER PERIODS OF INACTIVITY
Remove the sparking plug.
Quickly pull the starter cord right through several times in order to remove oil and deposits
in the engine compartment.
Check the sparking plug, replace it if necessary and screw it in.
Fill the petrol tank with the 2-stroke mixture.
13 TECHNICAL DATA
Engine displacement
24.5cc
Construction
Hand-held
Weight
5,4 kg
Fuel tank capacity
330ml
Blade length
610mm
Blade speed
1900r/min
Max. engine speed
9500r/min
Engine idle speed
3300r/min
Clutch engagement speed
4200r/min
Output power
850W
Engine oil / gasoline mixed ratio
1:40
14 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
99 dB(A)
Acoustic power level LwA
110 dB(A)
ATTENTION!
Wear
hearing
protection
when
sound
pressure
is
over 85 dB(A).
aw (Vibration)
7,5 m/s²
K = 1,5 m/s²
