VARO PowerPlus XQ POWXG3050, Руководство пользователя

Страница: 14 / 16

POWXQG3050
EN
Copyright © 2014 VARO
P a g e | 14
www.varo.com
15 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or by
a qualified specialist (qualified electrician).
16 TROUBLE SHOOTING
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Unit won’t start
or starts but
will not run. 
Incorrect starting procedures.

Incorrect carburettor mixture
adjustment setting.

Fouled sparking plug.

Empty fuel tank.

Primer bulb was not pressed
enough.

Follow instructions in the User
Manual.

Have carburettor adjusted by an
Authorized Service Centre.

Clean/gap or replace plug.

Fill fuel tank with properly mixed
fuel.

Press primer bulb fully and slowly 10
times.
Unit starts, but
engine has
low power.

Fuel filter is plugged.

Incorrect lever position.

Dirty spark arrester screen.

Dirty air filter.

Incorrect carburettor mixture
adjustment setting service
dealer.

Replace the fuel filter.

Move to RUN position.

Replace spark arrester screen.

Remove, clean and reinstall filter.

Have carburettor adjusted by an
Authorized Service Centre.
Engine
sputters. !

Incorrect carburettor mixture
adjustment setting.

Air filter is plugged.

Old or improperly mixed fuel.

Have carburettor adjusted by an
Authorized Service Centre.

Replace or clean the air filter.

Drain gas tank/add fresh fuel
mixture.
No power
under load.

Incorrect carburettor mixture
adjustment setting.

Old or improperly mixed fuel.

Air filter is plugged.

Fouled spark plug.

Have carburettor adjusted by an
Authorized Service Centre.

Drain gas tank /add fresh fuel
mixture.

Replace or clean the air filter.

Clean/gap or replace plug.
Runs
erratically

Incorrectly gapped sparking
plug.

Plugged spark arrester.

Dirty air filter.

Clean/gap or replace plug.

Clean or replace spark arrester.

Clean or replace air filter.
Smokes
excessively.

Incorrect carburettor mixture
adjustment setting.

Incorrect fuel mixture.

Have carburettor adjusted by an
Authorized Service Centre.

Use properly mixed fuel (40:1
mixture).