background image

- This appliance can be used by children aged 
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities 
or lack of experience and knowledge if they 
have been given supervision or instruction 
concerning use of the appliance in a safe way 
and understand the hazards involved.

- Children shall not play with the appliance.

- Cleaning and user maintenance shall not be 
made by children without supervision.

INFORMATION FOR THE USER

Congratulations for your choice. You have chosen high-end, 
high quality DHW HP, which will supply for you DHW 
economically and at the highest comfort level for a very long 
time. The DHW HP are built very robust and require very little 

maintenance. Nevertheless, in order to benefit most of your 

DHW HP, we recommend reading the instructions for use
carefully, before using the DHW HP. The instructions contain 
important information concerning safety, use and maintenance.

INFORMATION FOR THE INSTALLER

Please read this manual carefully before installing the DHW 
HP. This manual contains mandatory instructions of the
manufacturer, recommendations concerning the legal regula-
tions and standards, safety regulations and requirements as 
well as useful hints for the installation, the use and the main-

tenance of the DHW HP.  You will also find all information you 

need to ensure a smooth and most emery saving function-
ing. The respect of the manufacturer’s instructions, as well 
as the respect of the actual local, national and international 
standards, regulations and laws as well as the state-of-the-art 
regarding water and electrical installations, is mandatory and 
part of the warranty requirements. The DHW HP is designed 
for domestic use, indoors, in a frost-free environment. The 
water supply has to have drinking water quality. Nevertheless, 
some water compositions may need special precautions, for 
example in the case of low or high acidity (pH-value), high 
water hardness (scale building), iron and particles (dirt and 
sand) etc. may be necessary.

GENERAL INFORMATION

The heat pump usually covers a family’s need for hot water 
throughout the year.
 

The installation and the first launch of the DHW HP have to 
be made by a qualified and authorised installer according to 

the instructions and recommendations of this manual. Before 
connecting the DHW HP to the mains, the DHW HP and the 

installation have to be filled completely with water and to be 
checked for leakages. Ensure that the air flow requirements 
are met (room volume, air source, vent …). At first launch (or 

when the tank has been drained) the heat-up time (ambient 
air temperature of approx. 15°C, DHW temperature 45-55°C) 
is likely to

 

be 4 to 6 hours. Choose the HP operating mode to 

start, perhaps in combination with the supplementary heating.

FOR YOUR OWN REFERENCE

Please fill in all fields below, it can be necessay later on if any questions may occur in the future.

MODEL TYPE

SERIAL NUMBER

INSTALLATION DATE

PHONE NUMBER OF INSTALLER

INSTALLERS NAME

ADDRESS OF INSTALLER

CONGRATULATION

ENGLISH

4

Содержание VT100C










































Отзывы: