6
s
afeTy
:
The machine is designed for the manufacture of products that do not trigger any reactions or release substances that
may be harmful to the user when in use.
User safety is assured as follows:
•
Tools can only rotate when the bowl screen is closed and the bowl is lifted.
•
No access to rotating tools.
•
Clearance between screen/stand and lifting handle at least 1 31/32".
•
Noise level under 70 dB.
The machine is protected against overvoltage.
The machine should be positioned to allow space for normal use and maintenance.
Non-ionising radiation is not produced intentionally, but rather technically conditioned by electrical equipment (e.g. electric mo-
tors, live power lines or solenoids). The machine is not equipped with strong permanent magnets. By maintaining a safe distance
(between the field source and implant) of 11 13/16", any impact on active implants (e.g. pacemakers, defibrillators) can likely
be prevented.
The following recommendations apply to work with powdery ingredients:
•
Powdery ingredients should not be poured into the bowl from a great height.
• Bags of e.g. flour should be opened at the bottom, down in the bowl.
•
Do not run up to the maximum speed too quickly.
Placing your hands in the bowl while the machine is running may cause physical injury.
c
orrecT
Use
of
Tools
:
Recommended uses of tool:
The whip should not be struck against hard objects such as the edge of the bowl. This will shorten the life of the tool
because of increasing deformation.
To make mashed potato, use the beater and then the standard whip.
a
TTachmenT
h
Ub
:
The machine may be fitted with an attachment drive into which optional accessories, such as meat mincers and vegetable
cutters, can be attached.
For further information on the assembly and use of optional accessories, please refer to the manual that comes with the ac-
cessory.
r
ecommended
max
.
speeds
1 2 3 4 5
MIN MAX
1 2 3 4 5
MIN MAX
Содержание V20
