Varimixer KODIAK V20KT, Инструкция по эксплуатации и перечень запасных частей

Страница: 6 / 32

6
18
35/64
”
10
15/16
”
30
5/16
”
22
51/64
”
24
49/64
”
36
21/32
”
50
55/64
”
16
31/32
”
21
7/32
”
22
7/8
”
19”
22
29/32
”
19
9/64
”
8
5/32
”
11
9/64
”
17
13/32
”
17
11/64
”
31”
27
7/8
”
7
1/4
”
Technical data:
Kodiak 20 Gross weight Net weight hp Volts Amps Variable speed, tool
Model lbs lbs hp V A rpm
Floor model
407 363
1.6 115 10.3 64 - 353
Table model 200 176
Layout drawings:
Floor model:
Table model:
Electrical connection:
Voltage ratio at site
100V - 240V, 1 phase =
User can connect machine
Cable with plug is delivered with the machine
Only this cable must be used for the connection
The machine must only be connected to an
grounded supply
T he cable is fixed to the machine in the plug made of
silicone, see “ Components of the machine” page 9
The machine is protected by a 10A fuse built into the socket
on the back of the machine.
Voltage ratio at site
380 - 480 V, 2 or 3 phases, neutral or not =
Technician must connect machine
Cable without plug is connected to the machine
the cable must be mounted in the wall socket
The machine must only be connected to an
grounded supply
When the machine is connected, phase + n ground
or phase + phase + ground should be used. In both cases,
it is important to ensure that the voltage between the two
live pins matches the name plate.
Before the machine is connected to the power grid,
check that the voltage and frequency printed on the name
plate are correct for the installation location .
The name plate is positioned uppermost on the back of the machine.
The machine must be grounded. Failure to do so may cause injury .
If there is no ground connection, the EMC filter will not work, with the
risk of damage to the frequency converter.
NOTE
The machine must be protected
by a Residual Current Device:
RCD
with SI type leakage current
protection.