Varimixer KODIAK V20KT, Инструкция по эксплуатации и перечень запасных частей

Страница: 11 / 32

11
Before starting the machine:
Floor model: Place the bowl in the bowl trolley. Put the desired
tool into the bowl and wheel it into position between the bowl
arms. Ensure that the bowl is correctly engaged with the bowl
arms; see “
Installation, adjustments and fixing”, page 5 .
Table model: Put the desired tool into the bowl and place the
bowl in the bowl arms.
Fit the safety guard and turn it so the filling hole is accessible
when the machine is running. The loose filling chute must be
used if it is necessary to add hot ingredients during the process
(i.e. ingredients at temperatures above 140
o
F).
Turn the tool to lock it into the bayonet fitting.
Lift the bowl with the aid of the lifting handle.
The mixer is now ready to start.
It is possible to set both the running time and speed before
starting the machine; see next section:
Start the machine:
Press to start the machine.
Press next to to increase the speed.
Press next to to reduce the speed.
The speed is shown as a number on the scale
12345678
.
The display
12345678
represents the lowest speed,
approx. 64 rpm.
The display
12345678
represents the highest speed,
approx. 353 rpm.
If a specific start speed is wanted, you set the speed and then
start the machine by pressing .
Display of running time – Timer function:
Select a running time for the machine by pressing next
to . The running time is shown in minutes and seconds in
the timer field between and .
Running times of up to 90 minutes are available.
When the machine is running, the running time will not be reset
if
is pressed once; press once more and it will be reset.
If no running time is selected, the display will show the time
elapsed since the machine was started.
If the time set on the timer runs out while the mixer is running,
the machine stops and you hear a beep.
Inspection of ingredients while in use:
If the machine needs to be stopped temporarily without affecting
the running time, press . The machine will slow down and
then stop and the running time will stop too.
The bowl can now be lowered and the ingredients checked.
Lift the bowl and press , and the machine will start and the
running time will resume.
Stop the machine:
To stop the machine:
• Press
. Running time not reset.
• Press twice. Running time reset.
• Press the emergency stop - the running time will be reset.
• Lower the bowl - the running time will be reset.
In all cases the machine can be restarted by pressing
.
It will start at the lowest speed.
Operating the machine:
Emergency stop
Stop
Increase time
Timer (timer field)
Decrease time
Speed
indicator
Decrease speed
Increase speed
Start