Varifan MST-2B, Руководство по установке

Страница: 25 / 40

Page 25
STAGE 2 TIMER IDLE TIME
Stage 2 timer is activated when ambient
temperature reaches the main set point. When the
mist output is idle using this timer, the LED directly
beneath the number “2” will flash repeatedly.
The stage 2 timer idle time is adjusted in 1-minute
increments from a minimum setting of 0 minutes to
a maximum setting of 60 minutes. If you do not
wish to have the mist output use this timer, set this
parameter to 0. In this case, mist will be
continuously activated when ambient temperature
reaches stage 2 RSP.
Adjusting stage 2 timer idle time:
•
rotate the Selector dial to position (8),
•
rotate the Adjuster dial counter clockwise to
decrease the idle time, and clockwise to
increase it.
The stage 2 timer idle time is displayed on the
MST-2B.
CHAPTER 3 - USER’S GUIDE