Varifan ECS 5M, Руководство пользователя

Страница: 14 / 52

Page 14
ECS 5M
2.7 POWERING UP
Before powering up the ECS 5M, attach the faceplate to
the casing of the control panel using the six screws
previously removed.
Set Selector knob to position (12).
Upon power up, the unit will test it’s display by briefly
lighting all the segments of it’s LED. Make certain that all
segments light.
Following the LED display test, the unit displays the
ambient temperature of the room.
If the temperature is not displayed, refer to the Trouble
Shooting section in the appendix of this document.
Fig. 1
Four Fans (115V) and One Heating Unit (115V)
Momentary power interruptions may trigger false alarms! To
avoid false alarming when the ECS is connected to an alarm
system, install a time delay relay between the ECS and the
alarm system.