Varifan CPS-2C, Инструкция по установке и эксплуатации

Страница: 31 / 42

CPS-2C USER’S GUIDE
CPS-2C Section C-31
System Mode Settings
(POS 1)
Clock
Hovr
This parameter gives the time of day in the format chosen in Clock Format .
To adjust the time of day, press the SET/CLR button. At this moment, the
minutes will be adjustable. Press the F2 button to toggle between hour
and minute adjustments. Press the SET/CLR button once again or change
parameters with the parameter selection knob once the adjustments are
finished.
Clock Format Hr Fr
This parameter is used to set the format in which the time of day will be
displayed. Is this parameter is set to
24H , the Clock parameter will be
displayed in the 24-hour format. Is this parameter is set to A-P , the
Clock parameter will be displayed in the AM/PM format.
(POS 2)
Growth Day
g Day
This parameter is use to adjust the growth day of the ECS-3C controller.
The
Growth Day is used for the PC interface’s history. The Growth Day is
adjusted in 1-day increments from
OFF
, day -10 to day 365.
(POS 9)
Display Language
LANG
This parameter is used to select the language used by the CPS-2C. Is this
parameter is set to
ENG
, the configuration will use the English language.
Is this parameter is set to
FrA
, the configuration will use the French
language.
(POS 10)
RF Channel rf cH
This parameter is used to select one of the 16 frequencies of the WiFarm
network or deactivates wireless communication mode. If this parameter is
set to
OFF , other wireless communication parameters will disappear.
This parameter can be adjusted to
OFF
, 1 to 16.