Varifan CPS-2C, Инструкция по установке и эксплуатации

Страница: 26 / 42

CPS-2C USER’S GUIDE
Section C-26 CPS-2C
TIMER
on
off
TIMER
on
off
HI
REC
Open Time 2 (POS 3)
Open Time 2
This parameter is used to establish the duration of the run time for inlet 2
when it receives an opening demand. When
Probe 2 Readout is above
Main Set Point 2 , inlet 2 will wait for Open Delay 2 before opening for
Open Time 2 . This parameter is adjusted in 1-second increments from 1 to
120 seconds.
Open Delay 2
Off D
This parameter is used to establish the duration of the idle time for inlet 2
when it receives an opening demand. When
Probe 2 Readout is above
Main Set Point 2 , inlet 2 will wait for Open Delay 2 before opening for
Open Time 2 . This parameter is adjusted in 1-second increments from 5 to
600 seconds.
Close Time 2 (POS 4)
Close Time 2
This parameter is used to establish the duration of the run time for inlet 2
when it receives a closing demand. When
Probe 2 Readout is below Main
Set Point 2 – Differential 2 , inlet 2 will wait for Close Delay 2 before
closing for Close Time 2 . This parameter is adjusted in 1-second
increments from 1 to 120 seconds.
Close Delay 2
Off D
This parameter is used to establish the duration of the idle time for inlet 2
when it receives a closing demand. When
Probe 2 Readout is below Main
Set Point 2 – Differential 2 , inlet 2 will wait for Close Delay 2 before
closing for Close Time 2 . This parameter is adjusted in 1-second
increments from 5 to 600 seconds.
Probe 2 Max (POS 5)
Probe 2 Maximum
This parameter displays the highest value reached by Probe 2 since the
CPS-2C was powered up or since this parameter was last cleared. To reset
this value to the actual
Probe 2 Readout , press the SET/CLR button. The
Probe 2 Maximum is displayed to the nearest 0.1° from -58.0°F to 140.0°F
(-50.0°C to 60.0°C) or from -0.500’’H
2
O to 0.500’’H
2
O to the nearest
0.001’’H
2
O.