GEBRAUCHSANLEITUNG
6
87-900-854-01 (C)
Verbundkabel zwischen Controller und Pumpe
Verbundkabel zwischen Controller und Transformator
INSTALLATION
!
Die Spannungen auf dem Controller und dem zugehörigen
Transformator, sowie zwischen dem Transformator und
dem Versorgungsnetz sind bei Berührung gefährlich.
Schützen Sie den Controller und den Speisungs-
transformator bei ihrer definitiven Installation vor zufälligen
Berührungen.
!
Im Innern des Controllers bilden sich hohe Spannungen,
die schwere Schäden bis hin zum Tod verursachen
können. Vor jedem Installations- oder Wartungseingriff
den Controller von der Stromversorgung trennen. Im
Innern des Controllers bilden sich erhöhte Temperaturen,
die schwere Schäden verursachen können. Schützen Sie
den Controller bei seiner definitiven Installation vor
zufälligen Berührungen.
ANMERKUNG
Der im definitiven System installierte Controller muß so
positioniert sein, daß die Kühlungsluft frei um das Gerät
zirkulieren kann. Der Controller darf nicht in
Umgebungen installiert u/o benutzt werden, die
Witterungseinflüssen (Regen, Frost, Schnee), Staub
und aggressiven Gasen ausgesetzt sind und in denen
Explosions- und erhöhte Brandgefahr besteht.
Beim
Betrieb
müssen
folgende
Umgebungs-
bedingungen eingehalten werden:
•
Temperatur: von 0 °C bis +40 °C;
•
Relative Luftfeuchtigkeit: 0 - 95 %
(nicht kondensierend).
GEFAHR
!
GEFAHR!