Varian ProStar 400, Руководство по эксплуатации

Страница: 30 / 63

4
03-914786-00:3
Power Connections
•
Before plugging in the power cable, check voltage settings of
the modules at the input socket on the rear panel.
•
Make sure that the voltage settings of the modules are
identical with the voltage of your local power supply.
•
Use only a supply appliance with protective grounding.
•
If the indicated voltage is not correct, select the proper
voltage by removing, inverting, and then re-inserting the
voltage selector.
•
When the voltage selection and fuses are correct for your
power source, plug in the power cable.
The correct fuses should be installed.
WARNING:
FIRE HAZARD
For continued protection replace only with same type and rating of fuse.
If a new voltage was selected, check the fuses and change
appropriately with the following specifications:
For ... Use ... Part Number
115 Vac ±10% Two 5.0 amp T-type (slo-blo) 55-500338-00
230 Vac ±10% Two 2.5 amp T-type (slo-blo) 55-500344-00
Communication Connectors
For connection to Varian ProStar and Star LC modules, use
Cable Kit Part Number 03-909126-90. Follow the Installation
Instructions included with that cable. Information in the following
paragraphs is provided for users who wish to develop custom
interfaces to other devices.