![background image](http://html1.mh-extra.com/html/varian/prepstar-218-sd-1/prepstar-218-sd-1_driver-manual_3528264007.webp)
ProStar 210/215/ PrepStar 218/SD-1 SDM
-7-
03-914947-20:5
Hardware Window
Select from the list the type of the pump
:
isocratic, binary,
ternary, quaternary, iso injector, injector, ternary
+ injector. A new tab (
Pump B
,
Pump C
,
Pump D
or
Injector
)
appears depending on the selected type of pump.
NOTE:
- The system must be equipped by at least two ProStar / PrepStar modules to work as a
binary pump, three modules for a ternary one and four to work in quaternary mode.
- With this type of pump, a module can be used as an injector. In this case a new
Injection
screen becomes active in the method. To learn more about this option, refer to
the chapter
Control method for the ProStar / PrepStar pump
- When an
Injector
module is configured, in the lower part of the Galaxie Configuration
Manager an injector (of the new system) called
ProStar 210/215/218 pump
is created.
The ID entered here
must match the ID of
the pump.