Vari F-700H, Перевод оригинальной инструкции по эксплуатации, Страница: 6 / 20

F-700H

Any repairs, adjustments, lubrication, and cleaning of the machine must only be performed when the machine is off and with the
spark plug cable disconnected.
1.2.2 Noise reference values
Description F-700H
Engine Honda GXV390
Declared emission sound pressure level A at operator’s work station
9
L
pAd
(89,0+1,0) dB
Declared vibration total value of hand-arm transmitted vibration
10
a
hv,d
(2,5+1,3) m.s -2
Table 2: Noise reference values
1.2.3 Safety labels
The user must keep safety labels on the machine in legible condition and secure their replacement if damaged.
Location: Number: Description:
Combined sticker on the rear
side of the machine frame. ( Fig.
14
)
1 Caution.
Read carefully through the user manual before using.
2 Caution.
Disconnect the spark plug cables prior to undertaking cleaning, adjustment of maintenance of the machine.
3 Risk of hands cutting.
Avoid placing hands or feet in the blade operating area.
4 Risk of injury from flying debris, shavings, ejected objects, etc. Keep persons and animals at a safe distance
from the machine.
5 Do not exceed the maximum permitted slope incline when operating the machine.
6 Use a protection of your eyes and hearing.
7 Bypass lever – gearbox switching.
ON = engine drive of gearbox is on
OFF = engine drive of gearbox is off – manual pushing of the machine is possible
Independent stickers on the
control lever and on the
crossbar on the right side. (
Fig.
15
)
8
Drive activation of the work tool:
0 = work tool off
1 = unlock the safety button
2 = work tool rotates
9 Service brake.
Independent stickers on the
control lever and on the
crossbar on the left side. (
Fig.
16 )
10
Engages the machine drive.
0 = drive off
1 = drive on
11 Cutting height adjustment.
Independent stickers on the
blade cover.
(
Fig. 17
)
12 Arrow of work tool turning direction – to the right (clockwise).
13 Restricted area for other individuals or pets. Minimum safe distance from the machine 50 m.
Table 3: Safety labels
1.3 Basic information

If the left or right side is indicated in the text of the operating instructions, the view of the operator
behind the handlebars of the machine is always considered.
1.3.1 Use of the machine
This professional mulcher Hurricane F-700H is designed for mowing grasslands of all types of stalked grasses, preferably old and dry,
on maintained and unmaintained areas. The mulcher can be used for trimming self-seeding woody plants up to a diameter of 2 cm. The
most ideal periods for using the machine are those periods when the vegetation is dry and the cutting blade can crush the vegetation into
small pieces that do not need to be collected from the area. When mowing grasslands grown in the same period as they are mowed, their
maximum recommended height is up to 50 cm. Depending on the density, humidity and type of vegetation, this maximum height may be
lower.
Due to the used tyre pattern and the cutting height adjustment system, this machine is not intended for landscaping lawns.

Removal of protective devices and machine covers is prohibited.

It is always necessary to adapt the working width to the density of the cut vegetation.
1.3.2 Connectable accessories
It is possible to connect following accessories to the Hurricane F-700H mulcher: ASR-700 snow blade, snow chains, AV-650 sulky.

These accessories are sold separately. Check with your dealer about the launch date.
9
measured in accordance with ČSN EN ISO 11201 under conditions defined in ČSN EN 836+A1/A2, Annex H
10
measured in accordance with ČSN EN ISO 1033 under conditions defined in Č SN EN 836+A1/A2, Annex G
6
R
ev
is
io
n
0
1
/2
0
1
6