Vari Lite VL3015, Руководство по обслуживанию, Страница: 66 / 210

VARI
❋
LITE - VL3015 & VL3515 S
POT
L
UMINAIRES
S
ERVICE
M
ANUAL
4 8 0 2 . 9 6 7 9 . 0 0 1 0 0
Tilt EOT Sensor Replacement
Vari-Lite Part No: 23.9661.1253
To remove and replace tilt EOT sensor:
Step 1. Remove power from luminaire.
WARNING: You must remove all power from luminaire before performing maintenance. Fixture
may be very HOT after operation. Allow it to cool completely before performing any maintenance.
Step 2. At tilt-side leg, remove yoke leg cover by removing four 6-32 x 3/8" PTB screws.
Step 3. At sensor bracket, remove two 10-32 x 1/2" PPZ screws and remove bracket.
Step 4. Disconnect wiring from Tilt Encoder PCB.
Step 5. At sensor, remove two 6-32 x 3/8" PPZ screws and remove sensor from bracket.
Step 6. Replace by performing previous steps in reverse order.
Figure 2-25: Tilt EOT Sensor Replacement
Tilt Motor
Head not shown for clarity.
NOTE:
Assembly
Spring
Tilt EOT Sensor
Sensor
Bracket
Tilt Belt