Vari Lite VL3015, Руководство по обслуживанию

Страница: 46 / 210

VARI
❋
LITE - VL3015 & VL3515 S
POT
L
UMINAIRES
S
ERVICE
M
ANUAL
2 8 0 2 . 9 6 7 9 . 0 0 1 0 0
CAUTION: Do not push on gobo glass. Press on gobo carrier only.
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while
replacing. Clean with glass cleaner and soft cloth if required.
Step 5. As shown in Figure 2-8 , for Gobo Wheels 1, 2 and 3 (VL3015 spot) and Rotating Gobo
Wheel (VL3515 spot):
a. Remove current gobo by carefully pressing on edges of gobo carrier with fingers,
pressing gobo toward front end of luminaire
(toward lens) , and out of wheel.
b. Install new gobo as follows:
1) Align three tabs on gobo carrier with three notches in wheel (gobo can only be
oriented in one direction) .
2) Insert gobo carrier into wheel, ensuring that carrier snaps into place.
c. Close fan assembly and tighten captive screw.
d. Replace covers.
Figure 2-8: Rotating Gobo Wheel - Gobo Replacement
Step 6. For Fixed Gobo Wheel (VL3515 spot):
a. Release (open) spring retaining clip as shown in Figure 2-9 .
b. Slide gobo out of gobo wheel.
c. Slide new gobo in wheel (note, be sure key on gobo carrier fits into slot) .
Front of luminaire
Gobo Wheel
Gobo Assembly
Carrier
CAUTION:
Do not touch glass with bare fingers.
Press on gobo carrier only.
R
OTATING
G
OBO
W
HEEL
Press from this side