VARI
❋
LITE - VL1100CD ERS L
UMINAIRE
U
SER
’
S
M
ANUAL
2 4
1 5 F e b r u a r y 2 0 1 1
0 2 . 9 6 6 5 . 0 0 0 1 0
Addressing
Program Starting Address
The DMX starting address is entered using the Menu Display. This address will be retained even if the
power is removed.
Note:
Refer to
Chapter 4:
Menu System
for detailed instructions on menu functions.
Note:
Refer to your console operating instructions for specific information regarding its addressing
requirements.
To program a DMX starting address:
Step
1. Press [Menu].
Step
2. Press [Up] / [Down] arrows until
Address
appears. Press [Enter].
Step
3.
DMX
will appear. Press [Enter].
Step
4. Press [Up] / [Down] arrows to enter starting address.
Step
5. Press [Enter] to set.
Program Starting Address Without Calibrating
It is possible to bypass the calibration sequence and go directly to the Menu Display programming in
order to pre-program an address setting.
To program starting address without calibrating luminaire:
•
While powering up luminaire, press and hold [Menu]. Program address as in
Program Starting
Address
above.
•
Release when display reads ":"
Note:
The luminaire will require a reset to restore control.
Содержание VL1100CD
