Vari Lite BeamLine VL800, Быстрый старт

Страница: 9 / 16

88-105-7290-00 8
Step 3. At last luminaire in link, install male termination connector at DATA THRU connector. (Luminaires and other
devices on the same DMX chain may not function properly without termination.)
Figure 3: Data Link
Step 4. Connect AC Input Cable connector to power input source.
Step 5. Dress AC input and data cables and secure them so that they will not interfere with luminaire head and yoke
movement.
Installation Procedures
Floor Mounting the Luminaire
All luminaires included in this manual are designed to sit directly on its base in a floor installation application. When used in
this type of application, be sure to leave enough space around the luminaire to allow proper, uninterrupted airflow for cooling
and movement.
Hanging the Luminaire
The VL 800 BeamLine luminaire can be hung horizontally or
vertically from any structure designed to work with the type of load
created by this moving luminaire. Two mounting truss hooks or other
mounting hardware are required. Many compatible truss hooks are
available from different manufacturers for your particular needs.
A minimum of two hooks per luminaire is required. If mounting
method does not use truss hooks, two attachment points, per luminaire,
are required.
Install mounting hardware:
Step 1. Install truss hooks and omega clamps as shown in
Figure 4
.
Note:
Various types of truss hooks can be used. The Mega Claw truss
hook (as shown in the example above) as well as many other standard
hooks, can be ordered separately.
Step 2. Tighten hardware securely.
VL 800 BeamLine Luminaire Channel Requirements*
*As set by the luminaire’s menu system.
DMX512 Channels Description Menu Display
23 Channels 16-Bit Mode (default) 16
**DMX terminator required for last fixture on DMX line.
AC In
Termination**
Data In
Data Thru Data Thru
Mega Claw Truss Hook
(not provided)
Figure 4: Truss Hook Installation
Omega Clamp