VARDE OVNE 6701000 Oslo, Инструкция по установке и эксплуатации

Страница: 4 / 20

4
Important!
Before
lighting up your
Varde Stove
for the
first time, we recommend that you read these
instructions carefully and contact your local stove
vendor or building authoorities to inquire about
existing regulations regarding the intallation of
stoves. Please follow these regulations closely.
This
Varde Stove
Has passed the
Danish /European Standard DS/EN 13240
Norwegian (NS) 3058/3059 test , and AEA DE-
FRA for England and have thereby proved to be a
environmentally friendly product.
Regulations
All local regulations as well as National and
European, should be adhered to when instal-
ling your stove.
Proffesional installation
It is essential that the installation is carried
out by an experienced and competent install-
er who is HETAS registered see www. he-
tas.co.uk.
Under England and Wales Building Regula-
tions it is a legal requirement that the stove
is either installed by an competent person,
which is an installer who is HETAS registered,
Or that the installation is Carried out under
Local authority building control approval and
inspection.
The stove is designed for intermittent combusti-
on and can be connected to a chimney used by
other fireplaces, as long as the appropriate rules
and regulations are adhered to.
See the Building Regulations 2010 Ap-
proved document J.
All Varde Ovne stoves are closed fireplaces.
Please Note!
You are by law required to register your stove at the local chimney-sweeper
.
Until installation keep the stove dry and not to cold. The stove cannot stand moisture.That an
existing chimney, not necessarily is effective enough for a new modern stove.Vermiculite is a
very porous material, therefore handle with care. When refilling the stove, put the wood careful-
ly, use the glove.
EC declaration of confirmaty.
MANUFACTURER
Name:
Varde Ovne A/S
Adress Kongevej 246, DK-6510 Gram, Danmark
Stove Inspection
Name:
TEKNOLOGISK INSTITUT
Adress Teknologiparken, Kongsvang Alle´29, DK-8000 Århus C
Product
Varde Oslo
Product type Oslo
Type code Heating stove, suitable for intermittent combustion
Standard Costruction products (89/106/EC/) standard used
EN 13240, NS 3058/3059, AEA DEFRA for England
Application Residential Heating
Fuel Wood
Special conditions Non
CE-Markning
Issued 2013
Nominal Output 4 kW
Fuel type Wood
Fluegas temperature 244
°
C
Efficiency 78 %
Co-release 0,11 %