Trouble Shooting
A. Unit Does Not Heat Up
1. Make sure unit is plugged in.
2. Make sure power switch is on - switch will emit dim red light when
on. refer to model for location.
3. Check the power source - make sure outlet has power.
4. Is the red (low water) light on? - press reset button - refer to model
for location.
5. Is electrical cord damaged? - if so - call dealer
6. If all previous items are ok - call dealer
B. Steam does not come out
1. Does pressure gauge indicate pressure in boiler? refer to previous
section.
2. Is the vapor switch turned on? Refer to model for location.
3. Is hose connected properly? Maked sure mono block is locked.
4. Is the vapor volume knob on? Refer to model for location
5. When hose button is depressed does the unit make a clicking sound?
If not call your dealer. If unit clicks, either volume knob is off or
particles are lodged in the solenoid valve. Call your dealer
C. Unit does not hold pressure
1. Volume knob is set too high. Turn the knob toward the minus sign.
2. If this does not remedy problem, call your dealer.
D. Green light does not go on
1. Refer to problem A.
2. If unit heats and green light still does not go on, call your dealer
E. Red (low water) light does not go on
1. Boiler has water in it.
2. If boiler is empty, turn off immediatly and call your dealer
F. Vapor comes out of the cap
1. Cap is being over tightened. Replace cap “O” Ring. A replacement
“O” Ring is attached to the handle of your machine.
2. If pressure gauge exceeds 80 PSI call your dealer, do not operate the
equipment.
