Vapor Clean Blue Evolution, Руководство пользователя

Страница: 5 / 18

Plug into Electrical Outlet
Ø
The Blue Evolution should be the
only appliance plugged into the
electrical outlet.
Ø
If an extension cord is required:
Ø
Use only a 12 gauge / 15AMP rated or
higher extension cord.
Ø
50ft maximum length
Ø
The Blue Evolution will power up
and then turn OFF. This is normal.
Ø
Push the ON/OFF Button to turn-on.
7
Look foward to it.
Assembly / preparation
Filling the filter bowl
Your appliance is fitted with a hygienic water filter. You must
fill the filter bowl with water before starting, in order to bind
the extracted dirt in the water and to clean the suctioned air
in the water bath as well.
• Loosen the clips on the right and left of the filter bowl and
remove from its slot.
• Open the cover on the filter bowl by pushing off the rele-
vant clips.
• Fill with tap
water
up to the
green line
(approx.
2.0 litres).
• Re-insert the filter bowl, ensuring the switch cam on the
cover is in the correct position.
WARNING:
The appliance can suck in up to approx. 1.5 litres of liquid.
If you exceed this amount, the fill level sensor will stop suc-
tion automatically and LED D (page 2) on the display will
flash.
INFO:
If you only wish to suction liquid, such as accidental water
spills, it is not necessary to fill the appliance's filter bowl with
water.
When sucking liquids, the MAX. capacity in the container is
approx. 4 litres.
Inserting the steam suction hose
• Insert the connector of the steam suction hose into the
socket until you hear the click of the safety hook.
• To remove the hose from the appliance, press release but-
ton A and pull on the connector.
A
½
gallon
capacity
for each
tank
Extractio n Steam
7
Look foward to it.
Assembly / preparation
Filling the filter bowl
Your appliance is fitted with a hygienic water filter. You must
fill the filter bowl with water before starting, in order to bind
the extracted dirt in the water and to clean the suctioned air
in the water bath as well.
• Loosen the clips on the right and left of the filter bowl and
remove from its slot.
• Open the cover on the filter bowl by pushing off the rele-
vant clips.
• Fill with tap
water
up to the
green line
(approx.
2.0 litres).
• Re-insert the filter bowl, ensuring the switch cam on the
cover is in the correct position.
WARNING:
The appliance can suck in up to approx. 1.5 litres of liquid.
If you exceed this amount, the fill level sensor will stop suc-
tion automatically and LED D (page 2) on the display will
flash.
INFO:
If you only wish to suction liquid, such as accidental water
spills, it is not necessary to fill the appliance's filter bowl with
water.
When sucking liquids, the MAX. capacity in the container is
approx. 4 litres.
Inserting the steam suction hose
• Insert the connector of the steam suction hose into the
socket until you hear the click of the safety hook.
• To remove the hose from the appliance, press release but-
ton A and pull on the connector.
A
ON/OFF
Ø
Add water to the vacuum collection
tank to the fill line and re-attach.
(See page 8)
Add Water
Before turning ON the Blue Evolution
Ø
Remove tank caps and add water to
the steam and extraction tanks.
Ø
Replace tank caps.
Steam (page 6)
Ø
Squeeze the RED trigger
to release steam.
Vacuum (page 6)
Ø
Push the button on the
handle.
Extraction (page 7)
Ø
Push button on hose
handle.
Blue Evolution is Ready when:
Ø
Temperature ≥ 330 ℉
Ø
It will take 10 minutes for the steamer
to heat and reach working
temperature.
Insert Hose & Select Cleaning
Attachment
Ø
Lock front wheels.
Ø
Insert the hose and press until you
hear it click.
Quick Start-Up
5
Cleaning Functions