UNPACKING & INSPECTION
After opening the carton, unpack your new tool and related parts & accessories. Please inspect
it carefully for any damage that may have occurred during transit. Please check it against the
photograph on carton. If any parts are missing, please call customer service at:
1-800-386-0191
.
Do not operate this tool if damaged during shipment, handling or misuse. Do not
operate the tool until the parts have been replaced or the fault rectified. Failure to do
so may result in serious personal injury or property damage.
All damaged parts must be repaired or replaced as needed prior to operating this tool.
Check to see that all nuts, bolts and fittings are secure before putting this tool into service. If you
have any questions, or require assistance with damaged or missing parts, please contact our factory
customer service department at
1-800-386-0191
Please have the model number and date of purchase available for reference when calling.
MODEL NUMBER:
_____________
DATE of PURCHASE: ________________
SAFETY WARNINGS
READ ALL SAFETY WARNINGS BEFORE USING THIS TOOL
Some dust created by spraying, blowing, power sanding, sawing, grinding,
drilling and other construction activities contains chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm. Reduce your
exposure to these chemicals by wearing approved safety equipment such as
dust masks that are designed to filter out microscopic particles.
Avoid inhaling
vapors and dust. Wash hands after using.
This product contains chemicals, including lead, known to the State of California
to cause cancer, birth defects, and reproductive harm.
Wash hands after
handling
READ BEFORE USING
It is the owner and/or operator’s responsibility to study all WARNINGS, operating, and maintenance
instructions contained on the product label and instruction manual prior to operation of this
tool. The owner/operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining all decals or warning
labels and while in use, maintaining the unit in good working order. If the owner and/or operator are
not fluent in English, the product warnings and instructions shall be read and discussed with the
operator’s native language by the purchaser/owner or his designee. Make sure that the operator
comprehends its contents. Safety information shall be emphasized and understood prior to usage.
The tool shall be inspected per the operating instructions.
Users of this tool must fully understand these instructions. Each person operating this power tool
must also be of sound mind and body and must not be under the influence of any substance that
might impair vision, dexterity, or judgment.
Protect yourself and others by observing all safety information.
Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties, please contact our customer service department at:
1-800-386-0191
This manual is intended for your benefit. Please read and follow the safety,
maintenance and troubleshooting steps described within to ensure your
safety and satisfaction. The contents of this instruction manual are based
upon the latest product information available at the time of publication. The
manufacturer reserves the right to make product changes at any time without
notice.
SAFETY ALERT
Read and understand this entire instruction manual before attempting to assemble,
install, operate or maintain this tool. Failure to comply with the instructions may
result in serious personal injury and/or property damage!
The following signal words are used to emphasize safety warnings that must be followed when using
this tool:
Indicates an imminently hazardous situation that, if not avoided, WILL result in death
or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD result in
death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in minor
or moderate injury.
Indicates important information, which if not followed, MAY cause damage to
equipment.
2
3
