Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | R102 User Manual
20
13.
Traffic distribution of clients connected to the Router displayed by MAC addresses
Clicking on each MAC address in the table at the page bottom will get the detailed
traffic information of the clients.
14.
Application layer protocols
HTTPS, HTTP, and POP3S represent the top 3 protocols for data download and upload.
HTTPS, HTTP and DNS represent the top 3 protocols for device connection.
3.3
Quick Start
3.3.1 Network Guide
This page provides a quick guide to such functions as rapid networking of the Router, and
a display of the network port status and interface logic diagram. Refer to
for advanced settings.
Application of the network setup wizard will clear customer-defined configuration
parameters.
in chapter 1
for the
definition of the ports.
3.3.2 WAN setting – DHCP
DHCP
:
ETH0.1
and
WiFi AP
are bounded with the network bridge (br-lan).
ETH0.2
is
designed as the WAN port to connect the higher-level network. 4G/LTE port does not
work under this mode.