Vantron
|
Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | R102 User Manual
37
3.5.3 4G/LTE
Before you configure for 4G/LTE, be sure to install the activated SIM card in the slot. In
the 4G/LTE page, you can access the general and advanced settings, the connection log,
and traffic of the cellular network.
Confirm with your sales executive whether the 4G module is AT&T and Verizon pre-
certified or not. If so, when you apply for SIM cards from the carriers,
°
provide Verizon with the pre-certified module name
VT-MOB-CELL-mPCIe
.
°
provide AT&T with the pre-certified module name
VT-MOB-MPCIE-4G
.
Remember to ask the carriers for the APN which needs to be filled in the system during
4G setup.
Then proceed with the configuration as follows.
Description of the numbered areas
1.
Enable/disable 4G/LTE service
2.
Input *99***1# for AT&T SIM card and *99***3# for Verizon SIM card
3.
Input the APN provided by the carrier
4.
Enter the username provided by the carrier for PAP/CHAP authentication
5.
Enter the password provided by the carrier for PAP/CHAP authentication
6.
Click
Advanced Setting
for more configuration options
